About cleaning the knowledge of galvanized sheet air duct, we will clean galvanized sheet air pipe, hope that we can help you understand better through our explanation.
1. Gas flushing: this method uses a hose with a nozzle connected to the wind pipe to carry compressed air. The nozzle is designed to drive the compressed air to dust and dirt. The dirt and dust that is dried by the compressed air is transported to a vacuum container along the wind pipe.
Two, power wash: brush the dirty with pneumatic or electric brush. Then the dirt is sucked into the vacuum collector with the same way and direction of gas washing. This method requires as much care as possible without damaging the exterior of the thermal insulation.
Three, vacuum suction: the use of a similar hand type vacuum suction pipe to operate. Direct contact with the inner wall of the pipe with a brush to remove the dirt. This method requires a larger maintenance hole for the wind pipe to make the operator able to get it, but this method most likely miss a part of dust and dirt, because the air pipe can not form a complete negative pressure condition. The following methods can form negative pressure conditions.
We will use a good, appropriate service, let customers feel the warmth of family like, always look at the safety of customers as if they are friendly. We will use the natural advantage to create the unique features of the product, so as to give consumers the unique mood to enjoy the product.